Bassett Industries, Inc.   Design and engineering assistance for all
your contract manufacturing needs     ISO 9002 registered quality system  
HomeAbout UsContact UsDirectionsIndustries Served
SERVICESContract ManufacturingTube BendingLaser CuttingRoll BendingCNC MachiningWeldingSheet Metal FormingSaw CuttingSwaging / FlaringOther ServicesQUALITY - ISO 9002DESIGN ASSISTANCEQUOTATIONS2119 Sanatoga Station Road
Pottstown, PA 19464
(P) 610.327.1200
(F) 610.327.8800
E-mail: info@bassettinc.com


Directions to Bassett

#1. From Philadelphia International Airport take I 95 South approx. 8 miles to I476 North. Take I476 North approximately 15 miles to I76 west toward Valley Forge. Follow I76 west 3-4 miles to Rt 202 south in King of Prussia. Take Rt 202 south approximately 1/4 mile to Rt 422 west. Follow Rt 422 west approximately 18 miles to the Armand Hammer Blvd exit. At the top of the ramp turn right onto Armand Hammer Blvd and proceed to the third traffic light, High St. The Pottstown Hospital will be on your right. Turn right onto High St. and go to the first road on the right, Porter Rd. Turn right and follow Porter Rd. approximately 1/2 mile, the road changes names and becomes Sanatoga Station Rd. The road will make a left turn and start going up a small grade. Bassett is the second building on the hill on the left hand side.

#2. From Rt 100 in Exton take Rt 100 north to Rt 422 east. Follow Rt 422 east to the Armand Hammer Blvd exit. At the top of the ramp turn right at the yield sign and go 100 ft to the traffic light. Turn left onto Armand Hammer Blvd and proceed to the third traffic light, High St. The Pottstown Hospital will be on your right. Turn right onto High St. and go to the first road on the right, Porter Rd. Turn right and follow Porter Rd. approximately 1/2 mile, the road changes names and becomes Sanatoga Station Rd. The road will make a left turn and start going up a small grade. Bassett is the second building on the hill on the left hand side.

#3. Alternate route from I 95 South in Maryland at Port Deposit: Take Rt 275 north to Rt 276 north to US Rt 1. Go north on Rt 1 into Penna. Just inside Penna take Rt 10 north to Morgantown, PA. In Morgantown take Rt 23 east to Rt 100 north, then follow the directions in #2 above.

#4. From the Pennsylvania Turnpike in King of Prussia, exit the turnpike, go 1/4 mile to Rt 202 south. Go onto Rt 202 south approximately 1/8 mile to Rt 422 west then follow the directions in #1 above.

#5. From the Pennsylvania Turnpike in Dowingtown take Rt 100 north to Rt 422 east and follow the directions in #2 above.

#6. From Quakertown, take Rt 663 south to Rt 73 west. Follow Rt 73 west to Rt 100 south to Rt 422 east, then follow the directions in #2 above.